Barking Power uses Emerson’s Smart Wireless technology to improve plant availability and efficiency

Emerson_502612_a

Emerson’s Rosemount 708 wireless acoustic transmitters help identify failed steam traps, leaking valves and boiler tube leaks

High resolution photo


Emerson_502612_b

Barking Power has installed Emerson’s wireless acoustic transmitters across the plant

High resolution image


Emerson_502612_c

Data is fed into the plant’s existing Emerson Ovation control system

High resolution image


Emerson_502612_d

Barking Power Combined Cycle Gas Turbine (CCGT) power station in London, UK

High resolution image








MEDIA CONTACTS:
Grace Capwell
Emerson Automation Solutions
+1 (512) 834-7214
[email protected]

Rosemount® wireless acoustic transmitters identify failed steam traps, leaking valves, and boiler tube leaks.


AUSTIN, TEXAS  (June 18, 2012) -- Barking Power Limited has installed Emerson Process Management’s Smart Wireless technology to help identify potential problems, improving plant availability and efficiency of its Combined Cycle Gas Turbine (CCGT) power station in London. Emerson’s Rosemount® 708 wireless acoustic transmitters help plant personnel identify failed steam traps, leaking valves and boiler tube leaks, avoiding substantial costs for lost steam and feedwater as well as lost revenue from plant downtime.

Barking Power Station, operated by Thames Power Services, is one of the largest independently-owned generating plants in the UK, capable of generating 1000MW of electricity – about 2% of the peak electricity demand in England and Wales. To remain competitive in the deregulated UK power generation market, the plant makes continual improvements to increase plant availability and efficiency, which in turn help reduce overall unit generating cost.

“Improving process performance is all about understanding what is happening around the plant and being able to respond quickly to any problems,” explained Ian MacDonald, Senior Control Systems Engineer, Barking Power. “Emerson’s Smart Wireless technology enables us to introduce additional measurement points quickly and cost effectively at any location, so we can gather additional information to identify potential faults.”

To improve identification of failed steam traps and problem valves, Barking Power installed 35 of Emerson’s wireless acoustic transmitters across the plant. Should a steam trap fail or a small leak begin, an acoustic device transmits changes in sound and temperature which are configured to alert operators of a potential problem. The plant began gaining the benefits of the new devices immediately, as a leak from a high pressure super heater steam trap was identified that would have cost £1400 for every 24 hours of lost operation.

The plant installed 15 additional acoustic transmitters to monitor other problematic areas, including vent valves that can stick during start-up and pressure relief valves that don’t seat correctly. Previous manual monitoring was not only time-consuming but also failed to indicate when or why a release occurred, increasing the chances of a safety, regulatory, or environmental incident. The new wireless devices enable precise monitoring and alert operators when valves have opened for as little as a single second.

Rosemount 708 wireless acoustic transmitters have also been installed to identify leaking boiler tubes. These leaks not only reduce performance but also waste large amounts of costly boiler feed water, which is demineralized and chemically treated to help prevent corrosion. Data is fed into the plant’s existing Emerson Ovation™ control system, where noise levels can be trended to identify gradual changes. Repairs can then be scheduled during normal off-times to maintain maximum plant availability and avoid forced downtime.

Using the wireless networks already in place, additional devices can be added at much lower cost than if they had to be wired-in individually. This provides Barking Power with additional opportunities where monitoring was previously cost prohibitive – for example, identifying blockages in venturi eductors.

“Having already installed Emerson’s Smart Wireless THUM™ adaptors for access to stranded HART® diagnostic data in traditional field devices, we were very familiar with Smart Wireless technology and confident about using it in other applications,” said MacDonald. “The mobility and flexibility of the battery powered wireless devices also allow us to run trials and move devices to different areas without having to lay temporary cables. As a result, we can spot early problems and improve response to malfunctioning equipment – enabling better planning and utilization of maintenance resources.”

미디어:
• 연락처: 에머슨 글로벌 미디어 연락처

추가적인 정보:
에머슨 Exchange 365 커뮤니티
X Facebook LinkedIn YouTube 를 통해 에머슨과 연결되어 보세요.

에머슨에 대해 
에머슨(NYSE: EMR)은 전 세계의 중요한 산업에 혁신적인 솔루션을 제공하는 글로벌 테크놀러지 소프트웨어 회사입니다. 에머슨은 AspenTech의 대주주로, 선도적인 자동화 포트폴리오를 통해 하이브리드, 공정, 개별 제조업체가 운영 최적화, 인력 보호, 탄소 배출 저감, 지속 가능성 목표를 달성할 수 있도록 지원하고 있습니다. 자세한 내용은 Emerson.com을 방문하십시오.

이 웹 사이트를 사용하려면 JavaScript를 활성화하세요.