Power Station Reduces Simulated Startup and Shutdown Time by 44 Percent with Emerson Technology

1712-rawhide(1)

1712-rawhide(2)

Emerson’s embedded high-fidelity simulator is in use now for training, control logic testing, patch verification and continuous improvement of plant operating procedures at Rawhide Energy Station Unit 1. High resolution image 1 / High resolution image 2






Emerson’s embedded high-fidelity simulator in use now for training, control logic testing, patch verification and continuous improvement of plant operating procedures at Colorado Power Station.

PITTSBURGH (December 4, 2017) – Using simulation technology embedded in Emerson’s Ovation™ control system platform, Platte River Power Authority has simultaneously enhanced operator proficiency and boosted plant performance at Rawhide Energy Station Unit 1 in Wellington, Colorado. In the first four months following its installation, operators used the simulator to complete more than 400 man-hours of simulator training and experienced a 44 percent reduction in startup and shutdown time.

This 300-MW baseload unit has relied on Emerson’s Ovation™ control system to monitor and control critical processes since November 2015. With a 2016 capacity factor of 91.57 percent, the third-highest for comparably sized U.S. coal plants, plant operators have had little opportunity to gain much-needed experience in efficiently executing startups and shutdowns and confidently managing upset conditions.

Rawhide Unit 1 management chose Emerson’s Ovation embedded simulation technology, in which high-fidelity plant models are built with and maintained using the same familiar engineering tools as the Ovation control system. This enables Rawhide to maintain the simulator more easily, keeping it current with control logic and other plant changes.

Since installing the new simulator, Rawhide’s engineering department has been able to use it as a training tool for operations staff, giving them a safe environment in which to become adept at handling complex operating scenarios including:

  • testing control logic changes without risk to the actual plant – watching the outcomes as they play out in real-time in the simulated environment
  • verifying patches prior to install
  • continuously improving plant operating procedures.

“Our vision was to use the simulator to drive cultural change, consistency in plant operations and continuous operational improvement,” explained Johel Comas, senior controls engineer, Rawhide Station. “In a short time, we’ve experienced how the ability to make changes in a controlled virtual environment without worrying about taking the unit offline is invaluable as we continue to drive toward a culture of operational excellence at Rawhide Energy Station.”

Ovation simulators with embedded high-fidelity models establish the foundation for the continued evolution of Emerson’s simulation technology, according to Bob Yeager, president, Power & Water, Emerson Automation Solutions. “We are moving closer to the virtual power plant of the future, where the high-fidelity Ovation simulator will run in parallel with the Ovation control system,” said Yeager, pointing out Emerson is the only company that offers a single automation platform for both control and simulation.

“In this environment, operators will be able to test control logic changes in advance based on real-time plant data. By incorporating other Emerson technologies such as pattern recognition, Pervasive Sensing™ and analytical tools, we’ll be able to enhance the experience to allow plant operators to virtually experience what may happen in their plants before it actually occurs.”

Platte River Power Authority will present “Rawhide Station Using Simulation to Drive Cultural Change and Operational Excellence” at 1:30 p.m. on Dec.5 during Session 151A at POWER-GEN International.

미디어:
• 연락처: 에머슨 글로벌 미디어 연락처

추가적인 정보:
에머슨 Exchange 365 커뮤니티
X Facebook LinkedIn YouTube 를 통해 에머슨과 연결되어 보세요.

에머슨에 대해 
에머슨(NYSE: EMR)은 전 세계의 중요한 산업에 혁신적인 솔루션을 제공하는 글로벌 테크놀러지 소프트웨어 회사입니다. 에머슨은 AspenTech의 대주주로, 선도적인 자동화 포트폴리오를 통해 하이브리드, 공정, 개별 제조업체가 운영 최적화, 인력 보호, 탄소 배출 저감, 지속 가능성 목표를 달성할 수 있도록 지원하고 있습니다. 자세한 내용은 Emerson.com을 방문하십시오.

이 웹 사이트를 사용하려면 JavaScript를 활성화하세요.